How to Score Passing on the SAJ Technical Long-Radius Turn of the SAJ Ski Proficiency Test [Three Features Revealed Through Personal Experience!] 】

Naoki, a Japanese skierNaoki

Hello everyone!
I’m Naoki, a Japanese skier who gives skiing his all for life. I specialize in Japan’s SAJ ski tests and have helped many skiers pass.

This article is for advanced users of SAJ Level 1 and above!

Click here for the theme!

SAJ Technical long-radius turn Key points for passing

So,
As you all know, SAJ Technical is a further higher qualification than the ski proficiency test SAJ Level 1.

This level is up to a step, and finally pass the SAJ Level 1 and go next! It is a very unusual wall that stands in front of the skier.

The first time I got SAJ Technical, the long-radius turn. 2 I ate the point.

Finally + 1 This time, we’ve got the SAJ Technical long-radius turn.

  • How is SAJ Level 1 different from long-radius turn?
  • What do I need to pass SAJ Technical?

Let's talk about this point!

In fact, it is a very high level of explanation. SAJ Level 1 I think it’s better for you to be confused because you don’t see it. :)

Difference in level of long-radius turn between ski proficiency test SAJ Technical and SAJ Level 1

Difference between ski proficiency test SAJ Technical and SAJ Level 1

First, let’s talk about the difference between SAJ Level 1 and SAJ Technical in SAJ ski proficiency test!

What do you think is the biggest difference between SAJ Level 1 and SAJ Technical?

The answer is as one would imagine...

Naturally, Turn speed That's right.

However, the difference in speed is a result, Required by SAJ Technical There are technical elements necessary to increase speed.。

That is the exact answer!

Naoki, a Japanese skierNaoki

If you don’t understand the element, it will be a sad result as I am reduced to point 2.

This is a difference from what was required to be at SAJ level 1. In some cases, you may need to re-examinate what you have learned.

I will explain them one by one!

3 points to break the long-radius turn in ski proficiency test SAJ Technical

3 points to break the long-radius turn in ski proficiency test SAJ Technical

Here’s all the points you need to break through the SAJ Technical long-radius turn of SAJ ski proficiency test. 3 I will explain it!

Transition between 'extension' and 'bending' is fundamentally different from SAJ Level 1 and putting body weight on the skis.

First, let's talk about putting body weight on the skis and transition.

Putting body weight on the skis and transition are basic in turn but... The movement here is fundamentally different from SAJ Level 1!

  • SAJ Level 1... loading the skis while flexing the legs and stretching transition
  • SAJ Technical... Putting body weight on the skis and bending transition

This is movement Reverse Do you notice that it is?

Strengthing your feet, press the ski and pass in a curved state rather than standing up.

The advanced technique is much more than the previous putting body weight on the skis while carrying your own weight.

In the transition, we make a “banding system” transition in a low position as well as a swallowed state of foot.

Related reading
skiing Bending
[Bending Turns on Skis] Techniques for Stable Turns on Steep Slope Without Losing Pressure [With Video] This time... what! Video with an explanation! ! I was on my own time and had a lot of time to record the lesson! I have heard the term “bending”.

By not getting out of the pressure in transition, you can smoothly connect the turn and catch the snow surface at a quick time in the next turn.

This move is required in high speeds like the Long-Radius turn of SAJ Technical!

Control speed control in the first half of the turn and accelerate in the second half

Next, let's talk about the situation where we use the offset!

SAJ Level 1 is a technique that needs to be loaded and scratched in the first half of the turn, but when SAJ Technical becomes, the level of movement will rise with guns.

In the first half, skis scrape snow and stretch the skis, putting body weight on the skis; in the second half, apply even stronger pressure to bend the skis and accelerate.

Ski Sample

Let's create this flow!

This happens when the speed increases How to respond to “external forces acting on the skier” It is also a key element for the breakthrough test!

On the SAJ Technical level, it is unsuitable to be a slowing element when using the slide at the end of the turn!

When it comes to the SAJ Technical/SAJ Crown test or higher,
It’s okay to think that the end of the turn is not control, but acceleration!

Do not use the slide as much as possible in the end of the half, but try to control the slide while using the slide in the first half!

Shifting the position of putting body weight on the skis according to the turn phase

The last element is "putting body weight on the skis position" That's it!

SAJ Level 1 It was important to be able to slide in a stable position, even if steep slope. SAJ Technical, you need to move positions according to the situation of the turn.

This is to increase the turnover!

In the first and last half of the turn, putting body weight on the skis. More and more back / behind I'm going to lower it.

When the top is too strong at the end of the turn, you need attention because skies are slowing or slowing.

Also, putting body weight on the skis point is left behind. backward leaning Become, The body is left behind and outside foot / outside leg flies on the next turn. Be careful as this will result in a complete deduction of points (lol).

What is the low score of SAJ ski proficiency test in Long-radius turn?

ski proficiency test SAJ Technical long-radius turn Skating points will be deducted

As a ski-sleeping required by SAJ Technical in the SAJ ski proficiency test, speed is the biggest point!

So, what about slips that result in points being deducted?

...There's no such simple problem, right? lol

The answer is of course Sliding without speed is w

If I write it correctly, it's like this.

  • Sliding slowing down
  • Sliding that does not accelerate in turns
  • downhill distance between turns and it's a slip that doesn't come down easily
  • Skating in bad position

Of course, the speed is not enough and it will be reduced.

For example, the position is noted as it was described in the previous 'Putting body weight on the skis' position and it can be slowing down!

The difficult part of SAJ Technical test is
Unlike SAJ level 1 and not making a big mistake, Silette is beautiful.

If the speed is not enough, you will be able to get out.

So, try to practice with the knowledge that all the elements you need for the qualification have been explained so far are linked to increasing the turn-speed!

ski proficiency test SAJ Technical long-radius turn's recommended practice method

We will tell you how to practice the long-radius turn for passing the ski proficiency test SAJ Technical.

The first one is a bending turn.

The bonding movement is a necessary move to catch the snowfront in the first half of the turn, which means that it transitions in a low position without getting out of ski pressure.

ski proficiency test SAJ Technical's long-radius turn practice method

By learning this banding system transition, you can capture the feeling of snow-sized contact and extending putting body weight on the skis.

Let us know that from the first half of the turn, we will cut the snow and control it!

Long-radius turn is a short-radius turn, and it’s also a short-radius turn.

Naoki, a Japanese skierNaoki

I’m also trying to start the season with a check-in of senses in the benning turn!

And one more thing,
This is not a video of the sample, but it’s an Ossmeal exercise!

The name too "Push turn" That's it!

It’s easy to do, and we turn the outer foot/outer leg more and more in detail during the turning.

ski proficiency test SAJ Technical's long-radius turn practice method

So, it’s small and we can repeat it again!

Let us get the position when we push out and feel like it is to cut snow!

Ski Proficiency Test SAJ Technical’s long-radius turn 1 Reduced in the season. 2 Adding a point. 1 The little one evolved.

ski proficiency test SAJ Technical's long-radius turn experience

Let us finally share my experience with you!

As the title says,
When I first received SAJ Technical, the long-radius turn was... 2 I was inappropriate at the point.

As I was currently on the same level as SAJ Level 1, I didn't know any technical differences or points.

Finally, we started again with a review of the ski pole work to set the slide back from zero.

▼Please see previous articles for details

Related reading
Ski ski pole work
[Diary of Struggles: Episode 5] Returning to ski pole work to break through the prize! SAJ Technical Prices, it was the hardest wall in life ever. The first exam was a shock result of loss. What do you think about receiving it and what have you been thinking and practicing to cut off from there? I write all of the process here. 5 The worst day, the full ending!

Thanks to the ski pole work, the basic fixed was well-known but it was still far from the sliding of the qualified people that I watched on YouTube.

Naoki, a Japanese skierNaoki

What you do then will be so sliding...

I have seen the books and the scenes of good people many times.
After thinking about the stupid self, I found out that there was a clear difference between SAJ Technical and SAJ Level 1.

That was the main point of 3 that I explained this time.

Let me review it one more time,

  1. “Stretching” putting body weight on the skis and “Bending” transition
  2. Difference in the first half of the turn and acceleration in the second half
  3. putting body weight on the skis position movement

It was this 3!

I watched many books and videos, but at that time I was unknown in the dark.

You who read this article are lucky! !

If you don’t know what to do after passing SAJ Level 1, take advantage of my experience!

[Summary] long-radius turn of ski proficiency test SAJ Technical

Now, here's the summary for this time!

Summary of this time
  • SAJ Level 1 and SAJ Technical. 1 The difference is the speed!
  • 3 points are required to pass SAJ Technical!
    ① Stretched putting body weight on the skis and bent transition
    ② Stagger in the first half of the turn and accelerate in the second half
    ③putting body weight on the skis position movement
  • The long-radius turn of SAJ Technical is a slowing without speed, but the cause is in position!
  • SAJ Technical long-radius turn is a banding and output turn.

So,
What did you think?

Naoki, a Japanese skierNaoki

I got a hot, and it was a bullshit article.

Whoever wants to do this SAJ Technical course, take the long-radius turn and break through this season!


So,
That's all for today!

Regarding long-radius turn of SAJ Technical,
We have already created content that is referred to by real customers.

If you are interested in the long-radius turn, please see it!

SAJ Technical test preparation articles

Please watch until the end,
Thank you very much!

ski proficiency test SAJ Technical uneven terrain long-radius turn

If you enjoyed this article,
follow me!

Share this article!

感想や質問があればお気軽にどうぞ!

0件のコメント

Contents