Add points with SAJ Technical...
What kind of slip?
NaokiHello everyone!
I’m Naoki, a Japanese skier who gives skiing his all for life. I specialize in Japan’s SAJ ski tests and have helped many skiers pass.
This time we will present you the ‘Secret to pass SAJ Technical long-radius turn’ in SAJ ski proficiency test!
This time I wrote a slightly different article than usual, so
I hope you will enjoy it again!
As for what to do...
In the form of a sliding advice, we have explained the sliding of our customers and followers!
This time, we gave additional points in the SAJ Technical test,
We will fully analyze the sliding sample for those who are looking to get SAJ Technical qualification!
In other words,
NaokiIt's great that this place is done.
So I'm going to write an article that praises it (lol).
For those who aim to break through the prize wall,
"This part is well done! That's why you get extra points!"
For those who are concerned with this post,
I think it will be very good, so look at it until the end!
parallel turnlong-radius turn of SAJ Technical 76 points (+1 additional points)
Well, I immediately raised the bar (lol).
Let's take a look at long-radius turn with the SAJ Technical test 76 score!
I think you are going to be a testman, and let’s see!
- What was good?
- What about Silhouette and the skis carrying speed smoothly through and out of the turn?
- Conversely, what should be improved?
This perspective is extremely important.
I always say that “price is the most important thing.”
After that "Think carefully" becomes important!
Please keep this perspective in mind on a daily basis!
Whether it's someone else's skating or your own skating,
If you have the habit of studying in detail, it is just a big difference with others.
SAJ Technical long-radius turn is important to control the headpoint around the Turning Valley!
First of all “fulcrum of turn “About it!
In these articles I explained the point of turn.
If you haven't read it yet, please read this first!


Now, about the long-awaited skiing.
The second part of a turn, after the fall line and the second part of a turn, after the fall line.
The fulcrum of turns around the valley
Among them, I would like you to pay particular attention to the following:
Height of the fulcrum of the turn around the valley
That's it!
Please take a look at this image first!

This test video was a video of the award test last season at White Horse Hockey Ski Resort.
Later, even watching the video of all the participants, they were almost unseen to see those who had so beautifully high points and made their axis well!
NaokiThis valley is wonderful! Great is!
the second part of a turn, after the fall line of turns
So what about the second part of a turn, after the fall line?

As always, the image quality is poor but the branch point is properly reduced.
The second part of a turn, after the fall line from the valley round was well controlled.
If I had to say just one thing here,
(I'm tired of just praising you lol)
The second part of a turn, after the fall line, I felt that it was better to get a little lower.
The second part of a turn, after the fall line, was best to lower the turn point to hip/hip joint.
If you can lower the fulcrum just a little more,
The more strong pressure will be on the board, so it will produce a slurry and become a more sliding turn!
As you get to this point, it will no longer be the accuracy of action.
Achieved "accurate" loading the skis while flexing the legs in the latter half of the turn!
The “loading the skis while flexing the legs” is a SAJ Technical qualification that I have previously discussed in Cochila’s article.

The point is
putting body weight on the skis does not “bend” but “bends naturally”
It was!
In order to accumulate pressure and bring out sliding properties,
Not to move your feet actively from yourself and get closer to the snowfront.
The foot is long and putting body weight on the skis, and external forces acting on the skier are bigger in the turn end waiting for nature and legs to turn. I gave an explanation.

When you approach ski from yourself at the end of the turn, turning your feet and going upwards to step down, pressure will go beyond and the board will be more easily hit on the snow side.
The many of the SAJ Technical Non-Cwalified slides I have seen are the slides that the board is not able to get the sliding well out.
NaokiIf you are at SAJ Level 2 or SAJ Level 1,
Loading the skis while flexing the legs is a good way to control your speed.
At the SAJ Technical level,
Whether you can get extra points or not,
Can I use external forces acting on the skier that comes from the second part of a turn, after the fall line here?
That's right.
External forces acting on the skier are too hard, but they slow down.
However, if it does not stop the fall at all, it will be evaluated as shallow and low.
With such a very Siberian control being required, he has skillfully drawn the turn arc.
With the smooth movement of the center of mass, you have shown it to be smoothly linked in the end and the next round first half while releasing pressure well and sliding forward!
The technology here can only be described as amazing!
[Summary] long-radius turn with additional points passed ski proficiency test SAJ Technical
So, here's the summary!
- The fulcrum is high around the valley, and low in the second part of a turn, after the fall line
- Loading the skis while flexing the legs is not “wrapping” but “wrapping with nature.”
- The second part of a turn, after the fall line has controlled pressure Siberian control.
So,
What did you think?
We dared to highlight the slips of those who passed the exam.
“What was good? I’ve tried to explain it in the perspective!
I myself, from my student age, began to think of technology in a very detailed way.
It later made a huge leap forward,
I am now able to pass SAJ Technical.
always “He who thinks wins!” I think the best practice to think about the tech of sliding is like this time.
It's about considering the strengths and weaknesses of other people's skating!
Not only my own skating, but also
Get into the habit of watching and thinking about other people's skating!
Lastly, let me tell you one thing to those who have read this article! ^ ^
As I explained this time,
SAJ Technical is up to SAJ level 1 and the level will be increased!
It is also important to get some technical details in that way. I recommend that you start with the “current quality” first!
In order to improve the quality of such turns,
We have prepared an online course for you.
So that's it for this time!
Please watch until the end,
Thank you very much!





感想や質問があればお気軽にどうぞ!
0件のコメント