As expected, it's the last hurdle!
How to break through?
NaokiHello everyone!
I’m Naoki, a Japanese skier who gives skiing his all for life. I specialize in Japan’s SAJ ski tests and have helped many skiers pass.
This time it's SAJ Technical uneven terrainshort-radius turn!
Suddenly,
SAJ Technical uneven terrain short-radius turn is the most important thing to do.
control of misalignment
In SAJ Technical, it is a terrible test that if you fail to control the scratch, you will fall uncompliantly.

How do you use this way to develop the slide?
This time, from the reasons for points deduction to the points for passing the exam
I will explain in detail!
SAJ Technical uneven terrain short-radius turn (mogul/bump)

So, first,
For what reasons are points deducted for those who fail the exam?
Let's take a look at 4!
skiing is shifted too much and there is no speed

First, the difference between the SAJ Level 1 and the prize.
The first thing that comes to mind.
Yes...
It's speed
The reason for the decrease in speed is
There are too many discrepancies
After moving beyond mogul/bump, skies are quickly turned horizontal and long-lasting to stop falling, so much of the rashes and speed falls.
Tilt backwards and less contact with the snow surface

2The second one is backward leaning!
It can be improved somewhat with ski pole work, so
I will introduce you later!
By leaning backwards,
Especially the snow contact after getting over mogul / bump.
The worst part is that you can't get it!
Jumped up when exceeding mogul / bump,
skiing is floating.
In this case, generally
I fell hard onto the next trough
The impact will cause you to fall or go off the line.
Stance too wide

stance too wide
Or too much to get on the way is a reduction point.
The reason for widening the stance is
There are various positions and shocks.
However, on level ground, you can ski with your stance aligned.
Is it not a lot of people who will open up when they are mogul/bump?
If you are like that,
Among mogul / bump, I firmly ride outside foot / outside leg.
Arrange inside foot / inside leg there
Going back to the basics,
Let's be conscious!
By the way, I was also very worried about my legs, so
The course of the thick legs will be longer to talk, so I explain it in detail in the article of Cochila!
![[Uneven terrain conquering!] ] Solutions for those who can't do crowded legs due to mogul / bump](/_naoki/media/768/01M7ERGAFZFQEV5J7MGTW9NX6K.01M7ERGAJNPBQRG6RTMJVGW4T8.jpg)
Do not go off line or fall on the way!

Generally – 1 〜 2 It will be a drop point.
If you fall off the line or fall,
in many cases Runaway is the cause.
I drove too fast and lost control.
speed control is not possible in the first place
Regarding speed control,
As you said first, it is necessary to use the clay well!
So,
SAJ Technical uneven terrain. 4 Let’s tell you the reason for unfairness!
- skiing is shifted too much and there is no speed
- Tilt backwards and less contact with the snow surface
- Stance too wide
- fall off line or fall
So,
Let’s look at the points to pass SAJ Technical uneven terrain!
SAJ Technical uneven terrain short-radius turn (mogul/bump)

So from here,
Let’s look at the requirements for approval of SAJ Technical uneven terrain short-radius turn!
There are a total of 5, so
Let me introduce you all first!
- High-quality absorption
- slide smoothly and quickly
- Turn your upper body toward the valley
- Push the ski pole behind the mogul / bump
- Make time to point your skis downward.
Let's take a look at each!
High-quality absorption

First, about the absorption function,
"High-quality absorption" What is it?
If you give the answer...
leg section Only bend
absorption
Deliberately saying only the legs is
At the timing of the absorption action, Because many people end up bending their upper body That's it!
When upper body is tilted forward,
The spaces to turn the legs are lost, so you can't absorb high quality.
So you can get the shock absorbed and not eat it!
Therefore, to achieve high-quality absorption,
Try to keep your upper body as upright as possible, and bend your legs as much as possible to absorb the material!
slide smoothly and quickly

The next point is the speed of deviation!
I have been using the slurry too much before, and it has been explained that the speed will fall down.
SAJ Technical, you also need speed to get off mogul / bump, so controlling the speed of deviation is important!
How to speed up the shift...
Loosen the angle of the ski edge
Reduce the amount of snow you shave!
The idea is to reduce friction with the snow surface to increase the speed of shifting!
In this way, smoothly
Let's get off mogul / bump!
Turn your upper body toward the valley

The next point is about the upper body.
Same as short-radius turn in leveling the land,
Keep your upper body facing the valley!
The reason is...
If you rotate your body together with the skis,
Because you can't use the offset well and can't handle mogul / bump with a fast rhythm!
So, what are the tips for turning your upper body toward the valley?
To put it simply...
reverse twist
Adjust the direction of your skis and your upper body
On the contrary, twist it!
The posture when you shift your skis is
The basic method is to create a mold with reverse twisting.
Don't just be conscious of keeping your upper body towards the valley.
By making sure to go ski and the opposite, the upper body will result in a chip onto the valley.
NaokiThis is a very important point!
Let us know that we are going to get the top of the valley!
Push the ski pole behind the mogul / bump

The next point is the timing to hit ski pole!
When the ski pole is over the mogul / bump,
Let's push the back side of the mogul / bump!
The back of mogul/bump is good, but it’s hard to imagine personally what.
I Strike at the right timing over the mogul / bump That's what we're always thinking about!
If you poke the ski pole before crossing the mogul / bump,
Since you have to hit the ski pole while descending the trough, you end up having to pick up from the upper body.
This makes it easier for the body to be overwhelmed, and as a result it becomes more easily shocked.

So, hold back from pushing the ski pole until you get off the mogul / bump and get over it!
Make time to point your skis downward.

The final point is after crossing the mogul / bump!
When you reach the SAJ Technical level,
Mogul / bump also requires a sense of speed,
Make sure to spend as much time as possible for your skis to face downward!
On the other hand, if you spend too much time turning your skis sideways,
There is a risk of more misalignment or difficulty creating clean turn lone inside the mogul / bump.
Regarding this point,
As explained in uneven terrainshort-radius turn of SAJ Level 1,
After making full use of the basic technology of mogul / bump
Take the plunge and look down at skiing
Increase speed while making turns
Still, each mogul / bump
Process and glide smoothly
That kind of super high level skating is what
It was the slip that was expected from SAJ Technical!
The uneven terrain short-radius turn (mogul/bump) is a SAJ ski proficiency test.
Now, here's the summary for this time!
SAJ Technical uneven terrainshort-radius turn passing points
- High-quality absorption
- slide smoothly and quickly
- Turn your upper body toward the valley
- Push the ski pole behind the mogul / bump
- Make time to point your skis downward.
Notes on SAJ Technical uneven terrainshort-radius turn
- skiing is shifted too much and there is no speed
- Tilt backwards and less contact with the snow surface
So,
How did you feel this time?
SAJ Technical's uneven terrainshort-radius turn tips
To summarize in one word,
That's what it was!
In order to pass SAJ Technical,
To increase the quality of one turn is a absolute condition!
Starting with this article,
We have received many voices of those who have passed the SAJ Technical/SAJ Crown test!
- People who are aiming for SAJ Technical from now on
- People who can't get a passing score no matter how many times they try
- people who don't know what they need
Please go to our official line!
That's all for this time!
Please watch until the end,
Thank you very much!
-
Complete guide to the SAJ Technical SAJ ski test: discipline tips, difficulty and pass ratesPrize Testing First and Greatest Branch Prize Testing First and Greatest Branch SAJ Technical Prize If you have passed well to the SAJ Level 1 skiers, SAJ Technical is not a single line or one. -
How to Score Passing on the SAJ Technical Long-Radius Turn of the SAJ Ski Proficiency Test [Three Features Revealed Through Personal Experience!] 】This article is for advanced players SAJ Level 1 and above! Here is the theme! SAJ Technical long-radius turn Key points for passing As you all know, SAJ Technical is even more ski proficiency test SAJ Level 1... -
Three points to pass the SAJ Technical Short-radius turn in the SAJ ski proficiency testWhat is the difference between SAJ Level 1 and the short-radius turn technique!? Many people struggle with short-radius turn... Many skiers struggle with SAJ Technical/SAJ Crown test as well. So this time, what is the difference between SAJ Level 1 and short-radius turn technique? How... -
We reveal the key points for passing a free run combining turn sizes and rhythms (Japanese test event) (Free) in the SAJ Technical SAJ Ski Proficiency testThis time's theme is 'SAJ Technical a free run combining turn sizes and rhythms (Japanese test event)'! Speaking of a free run combining turn sizes and rhythms (Japanese test event)... Even for SAJ Level 1, starting from the 2020/21 season, the test category changed from 'sideslip' to 'a free run combining turn sizes and rhythms (Japanese test event)'! http...






感想や質問があればお気軽にどうぞ!
0件のコメント