NaokiHello everyone!
I’m Naoki, a Japanese skier who gives skiing his all for life. I specialize in Japan’s SAJ ski tests and have helped many skiers pass.
This time...what!
Comes with video explanation! !
In Togakushi, where I was spending my free time,
I had time to record the lesson!
“Bending” Have you ever heard the term?
Bend your legs to avoid losing pressure with transition,
The technology is a transition to lower the center of mass.
This time,
Why is bending important?
How should I learn?
I would like to explain this!
Now let's get into the content!
Why is it important to learn bending turns?
So, let’s talk about the meaning of learning Bending!
As the title says,
By learning bending,
Even with steep slope, you can ski stably without losing pressure!
By the way,
When actually skiing steep slope,
I don't always use bending.
Just as steep slope technology can be used in any circumstances, I will make sure that it is a technique to learn especially for the advanced ones aiming at the prize testing!
How to make a bending turn
So, I’ll finally explain how the Bender is!
First of all, bending is
Do not always change the height of your side from the snow.
That is the premise.
Use hip / hip joint softly,
The passage of the foot is a point.

The movement of the legs when entering the turn is
Leave it to nature and centrifugal force!
As for what I mean...
stand out from oneself
Do not try to extend your outer leg!
This is very important;
If you force yourself to work on the board,
It becomes a ski edge that doesn’t fit speed or slide, and the risk of mistakes is higher. This may cause you to get caught or slow down.
In short,
Even if you don't put your feet out,
When the speed rises, your feet go out and putting body weight on the skis also strengthens!
The top players show the silhouette that extends their feet long, but I think they are not strictly extending themselves, but just matching the curvature and speed!
Bending turn “Bending transition” method
in a bending turn bend your legs transition.
It is time to turn your feet,
I always
“The timing when the pressure is getting stronger”
explains.
What does this mean?
If you continue putting body weight on the skis, the pressure that comes back to the end of the turn will become stronger.
"I can't stand this!"
By continuing to apply pressure to the point that
At last, they lose pressure on their feet. bent I'm coming.

In this way bent transition is the best!
If you try to bend it yourself,
The pressure will go out, so we’ll be away from the purpose of the banding tower, so let’s be careful here too!
Regarding “transition”,
Please also refer to this previous article!

Ride inside foot / inside leg! ? Around the bending turn valley
From now on,
We will provide a detailed description of the way we enter the Bindington Tower!
First, how to start the turn.
Around the valley, place center of mass on top of inside foot / inside leg!
You'd be surprised if someone suddenly said that to you (lol)
So, I’m going to go out of foot / inside leg. ?
This feeling is that people who can be branding will soon know what I want to say, but those who don’t hear much about branding do not think the immy meaning.
So, let me explain a little bit!
First of all, to avoid any misunderstanding, I would like to say that
The basic outside foot / outside legputting body weight on the skis is a must!
The banding system sets the center of mass on inside foot/interior leg and takes the snow side with outside foot/outdoor leg.
This will be the point around the valley.
What to do putting body weight on the skis And Placing center of mass is different, so you need to be careful here.

[Please check! ] Hip direction around the valley of the turn
Although it is not limited to bending, Hip direction around the valley This is a very important thing to check!
For those who are looking at other articles
I'm sure you've heard it many times,
What I'm going to talk about here is "Extroversion of the waist" That's it!
In bending turns,
If you have no outward side of your back, you can’t putting body weight on the skis with natural and outer foot extended, so make sure that you are aware of the side of your back and start turning!

Regarding the valley,
This article explains it in detail!

Also, some of this is a paid article, but
We explain the movements in detail, down to the point of focus on one finger!

For those who want to learn high-level valley rotation
Please read this article first!
This article is available as a paid bonus.
Free sliding video advice included!
The Bending Turn of the Higher Skiers.
So, here's the summary!
- The banding turn is steep slope but the technology is stable and smooth without pressure.
- Always keep the height of your head above the snow surface constant.
- putting body weight on the skis continues and the legs are bent, then transition
- Place center of mass on top of inside foot / inside leg and move putting body weight on the skis to outside foot / outside leg
- Extroversion of the hips is a must
So,
This time I explained about bending turns!
I am applying the banding turn technique in the transitioning part so that pressure is not out of practice!
often heard in magazines or DVDs "Stretch putting body weight on the skis" I think it’s very easy to find out how you get into the turn this time!
So this time more!
See you next time!
Please watch until the end,
Thank you very much!







感想や質問があればお気軽にどうぞ!
0件のコメント