SAJ Level 1 and tech
What is the difference between short-radius turn? ?
NaokiHello everyone!
I’m Naoki, a Japanese skier who gives skiing his all for life. I specialize in Japan’s SAJ ski tests and have helped many skiers pass.
short-radius turn, which many people are not good at...
Many skiers are also struggling in the Price Test.
So this time,
- What is the difference between SAJ Level 1 and Tech's short-radius turn?
- What kind of movement is required?
- Why does it fail?
Such SAJ Technical short-radius turn
We will explain the key points to pass!
Differences in SAJ Level 1 and Short-Radius Turn in SAJ Technical

First of all, in short-radius turn,
What is the difference between SAJ Level 1 and SAJ Technical?
Let me explain!
First of all, what is short-radius turn required up to SAJ Level 1?
2 has one overwhelmingly different point.
That's it Speed And precision of movement In Yes!
SAJ Technical requires speed,
You need to reduce the slowdown factor but...
on top of that for control
How can we make good use of the gap?
That is very important.
So, based on those basics,
It is a SAJ Technical short-radius turn. 3 I want to introduce you to the point!

ski proficiency test SAJ Technical short-radius turn 3Two passing points

So without further ado,
To get more than 75 points in SAJ Technical short-radius turn
We will introduce the necessary 3 passing points!
- Slide around the valley to remove the skis from your body
- Transition between the ski edge of both skis
- Reduce misalignment and increase speed on the second part of a turn, after the fall line
Let's take a closer look at each!
Slide around the valley to remove the skis from your body

First, let's talk about the points around the valley!
The short-radius turn of the SAJ Technical/SAJ Crown test is a very important point for the valley!
The key points around the valley are...
Slide the skis off your body
In other words, you keep skiing out and out.
That's what it means.
Riding the speed, I stretch my legs,
Shift your skis.
This way, I try to spend more time around the valley
If you can be mindful, you'll be able to achieve a stable valley loop!
However, Points to note There is also!
If you just focus on putting your feet out
It's around the valley where there's no weight on it.
Unable to do basic outside foot / outside legputting body weight on the skis
You will be out in one shot!
Just ride the outside foot / outside leg and slide it properly
Let's keep this in mind!
Transition between the ski edge of both skis

The key points for transition are:
Transition between the ski edge of both skis
It may seem obvious, but
Synchronizing and transitioning both ski edge is an extremely advanced technique.
This is what I talked about at the beginning.
SAJ Level 1 It is a “precision level” that has been increasing the level.
To transition the ski edge between the two skis,
Even though the rhythm was early, I transition without rushing.
You need to set your center of mass at the center of both skis to create a flat spot correctly!
The ski edge angles and orientations of both skis are always aligned.
To make a perfect parallel turn,
Accurate synchronization from this transition was a very important point!
Reduce misalignment and increase speed on the second part of a turn, after the fall line

Finally, it's the second part of a turn, after the fall line!
The key points around the second part of a turn, after the fall line are:
Reducing misalignment That's it!
Misalignment is essential for speed control,
SAJ Level 2 The short-radius turn point has also explained the importance of controlling the thel at the end of the turn.
However, when it comes to the level of SAJ Technical,
Monitor the slip around the valley
For the second part of a turn, after the fall line, reduce the deviation in speed control and intentionally increase the speed.
Such skills are required.
In the SAJ Technical/SAJ Crown test,
It requires a completely different level of speed than before,
By minimizing misalignment around the second part of a turn, after the fall line,
Let's pick up the speed!
However,
If you want to reduce the shake, what exactly do I need to do? I think many people don’t know.
Here is the answer!
Do nothing! !
I don't think you understand the meaning,
As for what I want to say...
In the second half of the turn, do not change the direction of skiing
It is important that we fall together!
Without changing the direction of skiing,
The downward pressure continues to be a downhill distance between turns, which allows you to turn less.
There is some fear when it comes to steep slope, so
Many people try to control the fall, but they are going to cross ski.
While getting used to the slope and speed
Let us go on the turn without ceasing down at the end of the round!
These were the passing points for SAJ Technical short-radius turn!
Ski Proficiency Test SAJ Technical Short-Radius Turn 2 Attention to
From here,
SAJ Technical short-radius turn We will introduce you to 2!
The tail deviates significantly from the top

First of all,
The tail is greatly misaligned.
If the tail deviates more than the top,
This will be a turn with strong braking elements.

The Price test requires a speed-to-route turn that eliminates the brake element as quickly as possible.
These turns where the tail shifts significantly
It's easy to get points deducted!
Again,
It is very important to control and control the tel.
However, at the SAJ Technical/SAJ Crown test level
Use the shell at the time you get to turn from top, and let it be able to turn in the speed without a strike with extreme strength!
Both edge change cannot be performed
Let's also introduce some points to note when using transition!
The most common reasons for points deduction are:
transition on both ski edge is not completed
That's what I mean,
To put it in more detail...
Only ski edge of outside ski is switched
This is a phenomenon.

steep slope cannot make a flat with transition,
outside foot / outside leg only transition, valley rotation outside foot / outside leg only There are many people who can see ski edge, so be careful!
As I explained in the point section,
Transition is a way to move the center of mass into both skies.
“Correct flat” while making
Let's go to transition!
[Summary] short-radius turn passing points for ski proficiency test SAJ Technical
Now, here's the summary for this time!
The key points for passing SAJ Technical short-radius turn are 3
- Slide around the valley to remove the skis from your body
- Transition between the ski edge of both skis
- Reduce misalignment and increase speed on the second part of a turn, after the fall line
SAJ Technical short-radius turn Points to note 2
- The tail deviates significantly from the top
- Become transition only for ski edge of outside ski
So,
How did you feel this time?
short-radius turn of SAJ Technical is
Even though steep slope is fast and rhythm makes mistakes, it’s easy to do.
It is a very difficult type of one that requires speed and accurate action!
In order to pass SAJ Technical,
To increase the quality of one turn is a absolute condition!
For those who are aiming for SAJ Technical from now on
We also offer courses to improve the quality of your turns!
Starting with this course,
We have received many voices of those who have passed the SAJ Technical/SAJ Crown test!
- People who are aiming for SAJ Technical from now on
- People who can't get a passing score no matter how many times they try
- people who don't know what they need
Please see the limitation of this line!
That's all for this time!
Please watch until the end,
Thank you very much!
-
Complete guide to the SAJ Technical SAJ ski test: discipline tips, difficulty and pass ratesPrize Testing First and Greatest Branch Prize Testing First and Greatest Branch SAJ Technical Prize If you have passed well to the SAJ Level 1 skiers, SAJ Technical is not a single line or one. -
How to Score Passing on the SAJ Technical Long-Radius Turn of the SAJ Ski Proficiency Test [Three Features Revealed Through Personal Experience!] 】This article is for advanced players SAJ Level 1 and above! Here is the theme! SAJ Technical long-radius turn Key points for passing As you all know, SAJ Technical is even more ski proficiency test SAJ Level 1... -
We reveal the key points for passing a free run combining turn sizes and rhythms (Japanese test event) (Free) in the SAJ Technical SAJ Ski Proficiency testThis time's theme is 'SAJ Technical a free run combining turn sizes and rhythms (Japanese test event)'! Speaking of a free run combining turn sizes and rhythms (Japanese test event)... Even for SAJ Level 1, starting from the 2020/21 season, the test category changed from 'sideslip' to 'a free run combining turn sizes and rhythms (Japanese test event)'! http... -
[Most Difficult Level] How to Conquer ski proficiency test SAJ Technical uneven terrain short-radius turn (mogul / bump) [SAJ]As expected, the final challenge! How do you overcome it? This time, it's SAJ Technical uneven terrain short-radius turn! To jump straight in, what is the biggest point of SAJ Technical uneven terrain short-radius turn... Controlling the misalignment...







感想や質問があればお気軽にどうぞ!
0件のコメント