[How Skis Run] Three Steps to Bring Out Grace and Running

What is the mechanism by which skiing runs?


Naoki, a Japanese skierNaoki

Hello everyone!
I’m Naoki, a Japanese skier who gives skiing his all for life. I specialize in Japan’s SAJ ski tests and have helped many skiers pass.

Suddenly,

"skiing doesn't run at all..."

Is there anyone who is worried about this?

For those who aim to pass the SAJ Technical/SAJ Crown test
Some people are aiming for All Japan in the technical selection.

Probably many advanced skiing users
skiing “Run” You will have your head without getting it out to the maximum.

When it comes to prize class,
How can you bring out the best performance of skiing?
It is no exaggeration to say that this is the deciding factor!

There!

Why is this time skiing? “I’ll tell you how to get out of the ski course!

Read to the end, learn how skies run Gangan and break the SAJ Technical/SAJ Crown test and the walls of local congresses! ^^

▼Click here to listen to the audio!
(You can also play in the background!) .standfm-embed-iframe { height: 190px; } @media only screen and (max-device-width: 480px) { .standfm-embed-iframe { height: 230px; } }

Why does skiing run?

So, why does skiing run in the first place?
I would like to start by explaining the mechanism!

To put it very simply...

Because skiing bends and the force to return works.

That means it!

In other words, Because skiing's "deflection return" power works That's right.

The external forces acting on the skier is a force that rejects to return. With this power, skies run.

In skiing where you want to run like this,
Sliding with as little slippage as possible The principle is to do this!

Throughout the turn, Sliding on the thin ski tracks in the snow using the sidecut of skiing can make you first a good way to get back. With that in mind,

Let us go to the next way to get out of the ski race!

3 steps that bring out the “driving” of skiing

The mechanism to draw the ski race. 3 We will explain the steps in detail!

Click here for the 3 steps!

STEP
Set up ski edge of skiing

STEP
Make skiing flex

STEP
Restore the deflection of skiing

Let's take a closer look at each!

A ski edge.

skiing Running Deflection ski edge

The first thing to do is to firmly set up the ski edge in the first half of the turn.

When the turn starts, you are aware of getting skiing to the snow surface as soon as possible and scrolling thin ski tracks in the snow.

② Flex skiing

skiing Running Deflection Flex

If you can go on the snow edge and make a footfield, then let you take ski next.

By putting weight on the surface of skiing,
In the first half of the turn, ski edge was standing and leaning towards skiing."Deflection" is born.

③Restore the deflection of skiing

skiing Running Deflection Return

After firmly bending the skiing,
Propulsive force is generated by releasing the deflection.

By strengthening the two-touch, the power to try back will also be stronger and by releasing that power towards the next turn, the skies will get out further.

Furthermore, movement of the center of mass before and after producing the driving performance of skiing

In the 3 step above,

STEP
Set up ski edge of skiing

STEP
Make skiing flex

STEP
Restore the deflection of skiing

That's how it goes,
Adding the “Foreward After Movement of the Center of Mass” to this series of streams, we will draw further run!

The first half is upper, the middle is center, and the latter is thal and the movement of the center of mass from front to back.

In this way
Skiing itself will be actively sliding back/back to the front!

Failure example of not being able to produce good performance with skiing

I would like to introduce one example of failure that I often see and hear about!

That is “My body rotates.” That's a failure!

Steep slope short-radius turn transition
Steep slope short-radius turn transition

When you try to turn skiing with your body,

  • leaning too far inside and losing outside-ski support
  • Scheeren

Because I can't find a foothold,
You will no longer be able to place weight straight on skiing.

As a result, they cannot be well-established.
important for running "Deflection release" will also disappear.

Your body will be around and you will kill your ski race, so check out your own sliding!

Mechanism of running skiing Summary

Now, here's the summary for this time!

Summary of this time
  • The driving force behind skiing is the ability to return to its original shape after bending.
  • 3 steps to run skiing
    A ski edge.
    ②Deflect skiing
    ③ Release the deflection of skiing

So this time,
The mechanism of skiing. 3 I’ve shared the phase and explained it!

“Why does skiing run?” Understanding this principle in your head means "How do I run it?" This will give you a hint to think about.

First, this time we talked about the mechanism.

So next time,
“How do I run skiing?”
I want to explain the action in detail!

Please refer to this article as well!

Related reading
ski proficiency test SAJ Technical loading the skis while flexing the legs
[SAJ ski proficiency test] Run the board with the 'loading the skis while flexing the legs' needed to pass SAJ Technical and conquer the SAJ Technical/SAJ Crown test! I don’t have any problem with the board, do you? I had to talk about the turn before. The content is transferred to the right location according to the circumstances in the turn.
Related reading
Skis, putting body weight on the skis
Let's understand the 'putting body weight on the skis' and 'weighting' and master the tricks to flexing your ski / skis! I am currently taking a ski problem survey in my Mormaga, but if you are looking at the problems that you have received in this survey, please tell me how to make your ski fun! and...

That's it for now!

Please watch until the end,
Thank you very much!

Ski technique lesson banner

If you enjoyed this article,
follow me!

Share this article!

感想や質問があればお気軽にどうぞ!

0件のコメント

Contents