Who controls transition
Win the prize! ?
NaokiHello everyone!
I’m Naoki, a Japanese skier who gives skiing his all for life. I specialize in Japan’s SAJ ski tests and have helped many skiers pass.
- I can't get a passing score on Tekkura long-radius turn
- For some reason skiing doesn't run
- We cannot move around a stable valley.
For those who aim to take the SAJ Technical/SAJ Crown test,
If you are interested in this, please see the article until the end! ^ ^
Among the candidates for the SAJ Technical/SAJ Crown test,

Even though I didn't make any mistakes,
For some reason I can't get a passing score on long-radius turn...
Do you not have a lot of people concerned?
Most of the causes are
"Because skiing is not running"
That's it!
There is no technical condition, but the board doesn’t run.
The biggest cause is
It's in "Turn's transition"!
If the transition is better, you will be captured on the snow side at the next turn and you can get a heavy turn.
As a result, skiing will be running!
That's what it means!
What is the transition, what is the transition! ?
This time, I would like to explain!
The most important image of movement of the center of mass in transition of long-radius turn
Until now, everyone has talked about transition.
What kind of image did you have when skating?
Probably many people “Drop center of mass to the valley side in the first half of the turn!” Have you ever received a technical explanation?
Actually, this explanation is not enough!
I myself have been
I was aware of the movement to crossover ski and center of mass in transition, using the power that was put at the end of the turn for the next round first half! (The picture below)

It is better to distance skiing from center of mass.
The silk around the valley also looks big and I thought your outer legs would look long!
But when this consciousness becomes too strong,
The outside foot/outdoor leg will not be able to carry weight and you will not be able to make a ski-scoat from the first half of the turn.
It will also cause skiing to be criticized.
In transition, Not only the “side movement” to ski, but also the “long movement”. You will need it!
In other words "Vertical movement" is the movement of center of mass following skiing. That's it!
Let's actually compare the images!

If you compare it with the first image,
The center of mass is moving to the direction of skiing while falling down the centre of mass onto the valley.
NaokiIt is important to make a smooth flow of the board and center of mass!
The last transition is more heavy on the outer legs, so it will be possible to make a spoon from the first half of the turn.
To get the transition that can turn the turns to draw these ski drivers, Important 4 points We will explain about it in the next chapter!
long-radius turn, transition, 4 one point
So it is important to make a transition into the "long movement" that is incorporated. 4 I will explain the point!
Here are the 4 points explained this time!
- Always maintain the pressure sensation of the boots
- Align your chest to face skiing
- Make the shoulder line parallel to slope
- Start shifting weight to mountain leg before neutral
Well then,
Let's take a look at them one by one!
① Always maintain the pressure sensation of the boots

First of all, not only transition,
Do not get out of both shin and shoes pressure in every turn situation. is important!
Always have this feeling.
The center of mass is difficult to get away from skiing and can always stick the position that you are going on skiing!
Just push the shoes! “When you’re too aware of it, the front trend will become stronger or your seat falls down so much attention!
NaokiI often lean forward too much because of this...T_T
Instead of forcing shin into your boots
You should be aware of the "hip / hip joint" while using your shoe's front-wing angle!
②Align your chest to face skiing

Next is the posture when transition.
In transition, you will make time for the board to be flat while leaving the center of mass on ski.
If you can make a flat with transition,
when entering the next turn waist high position You can take
When creating a neutral,
Make sure that the direction of skiing is facing the direction of your chest!
Be careful here too,
If you try to flat the side of ski on your foot without just reverse, the turn will be lower and leaning too far inside and losing outside-ski support.
In transition, make your chest and ski right and be aware of the right movement of the center of mass!
By the way "High waist" Regarding the difficult term,
This article explains it in detail!

③Make the shoulder line parallel to slope

Align the shoulder line with slope By that,
It will be easier to create a flat state!
If this can be done, the movement of the center of mass will become quite easier, so those who have a weak awareness of their shoulders line must try it again and re-examinate!
NaokiWhen I feel bad, I’m always trying to check out if the arm line is in accordance with me first!
By the way, not only transition,
If you are aware that always in the turn to parallel slope and shoulders line, it is recommended because the slide is quite stable.
④Before neutral, start shifting your weight to the mountain leg

The last one is a very difficult advanced technique!
Before you enter the neutral in transition, we move the center of mass while carrying weight on the mountain foot.
The timing and sense of movement of the center of mass is very difficult!
If you’re wrong, you’ll get out of the top or go into transition without going down the center of mass to the valley side, so you may not be able to master it easily.
Once you can do this,
In the next turn, you will be able to take a natural and high position and get the snowfront!
As a result, you can get the ski from the first half of the turn so that the slide evolves as the board runs!
This is a move that has also been adopted by players in the technical selection.
This is a very high level technique!
NaokiIt's quite difficult though...
If you are confident, it's worth a try! !
The long-radius turn transition is often a failure.
Even if you are an advanced level person aiming for the SAJ Technical/SAJ Crown test
Unfortunately “skiing does not run transition” There are quite a lot of people who have done this.
Of course I won't get a passing grade (lol)
Here I will present an example of such a sad transition, so let you not fail the same and refer to that people who are concerned can improve!
Failure example ① Passing upwards

The first failure example is
This is a pattern that “goes out to the top”.
As a failure example of transition,
There is a lot of this pattern!
The reason why it goes up is
It is not waiting for the plate to be flat, or can't move the center of mass to the valley side until it becomes flat.
If you go up with transition,
As you can’t take the pressure to the next round at the end of the turn, skiing will not be done.
Move your center of mass while paying attention to both the pressure against your boots and the line of your shoulders.
Failure example ② Lowering the position too much

The more advanced you become, the more
This is a common failure example.
If you lower your position too much,
It will lean backwards.
In other words, since the weight is applied to back / behind
The top of skiing is lighter, you can’t accept the pressure or take the snow side!
NaokiWhen the sliding becomes hard due to force,
These mistakes will be easier.
During transition, you feel the “pressure of shoes” and the reaction from the snow surface.“The feeling that the feet are turned.” use
transition Summary of skiinglong-radius turn
Now, here's the summary for this time!
- The most important thing about transition is
The movement of the center of mass is also included in the “move of the center of mass” image. - long-radius turn, transition, 4 one point
① Always maintain the pressure sensation of the boots
② Correct the direction of the chest with skiing
③Make the shoulder line parallel to slope
④Before neutral, start shifting your weight to the mountain leg - long-radius turntransition failure example
① Pass above without waiting for the flat
②Position too low
What do you think?
In order to get a passing score in the SAJ Technical/SAJ Crown test,
The absolute condition is to be able to make turns where skiing can run!
Current carving skies can easily turn, but it alone cannot get the ski race out.
So, like this explanation,
To maximize the performance of skiing, in transition. movement of the center of mass direction and How to use your body becomes very important.
[If transition changes, the sliding will change! ]
This is what I have felt by mistake in the trial to develop sliding for results in tests and congresses.
I myself, by reviewing the transition movement, became able to appeal all the sliding streams of the start-to-goals rather than one turn.
The skiers who are troubled with the scores of testing and congresses, let this season be a “transition revolution” to make the skiing dramatically evolving!







感想や質問があればお気軽にどうぞ!
0件のコメント