NaokiHello everyone!
I’m Naoki, a Japanese skier who gives skiing his all for life. I specialize in Japan’s SAJ ski tests and have helped many skiers pass.
I am currently taking a question of my skiing in Marmara.
Looking at the concerns raised in the questionnaire,
I would like to know the trick to bending skiing!
We received many concerns.
Even in competitions and exams, High scores are given by
People doing "turns where the board is running"
What is!
After all, skiing as a competition,
"A competition where the person with the fastest turn speed wins"
That's right.
And to be extreme,
The basic technology of skiing is
“It’s all about increasing turn speed.”
It's no exaggeration to say that.
To keep a good score in high-level competitions and SAJ Technical/SAJ Crown tests, turnspeed is essential!
So,
This time I want to explain the way you can get up the turnover!
The true identity of “the skis carrying speed smoothly through and out of the turn” of skiing
Whether it's the skiing tournament or the SAJ Technical/SAJ Crown test,
In short, the skis that give you high scores are A slip where the board is running That's right.
They may have some look nice, names and wire points, but they are the next two.
In the end “Are you able to make the turn that the board is running?” I'm looking at it.
Here, first of all, I want to reveal the original identity of the skis carrying speed smoothly through and out of the turn!
By pressing ski/skis the plate is shaken and the resistance that the shake tries to return to its origin works and accelerates.
It's a very simple mechanism!
This is a personal opinion,
The basic technology of skiing is
I think it’s all about to “run the board”.
improve your position,
To improve the quality of your turns,
Reduced all deceleration elements,
This is to express a smooth turn.
That is to raise the turnover!
And the movement required to run the board is
[Weight] That's how it works.
In “Kaju”,
There are two "putting body weight on the skis" and "weighted" 2.
From now on, everyone[Weight] I'm going to talk about
First of all, about this 2,
I would like to explain it in detail next time!
So,
What I talked about here is
Don't just follow the event
Let's build the "essential technology foundation"!
That's what it was!
In the background,
"To run skiing"
Don't forget that!
Understand the difference between “putting body weight on the skis” and “weighting” in skiing!
As explained earlier,
There are two types of “Putting Body Weight on the Skis” and “Putting Body Weight on the Skis”.
If you explain them easily,
- [putting body weight on the skis]...Put your weight on skiing
- [Weight]...Add more weight than your body weight
What is putting body weight on the skis?
In contrast to carrying your own weight,
The weight acts on the board yourself,
You will be applying more force than your own weight.
By the amount of force that exceeds the body weight applied by this weight,
The board changes to the power running.
But strictly speaking...
Weight is going to work on itself, but
As a result of using external forces acting on the skier,
You can transmit a much greater power to the snowfront than you tell your weight.
And its power is
The higher the speed, the more it will increase!
I really want to explain how putting body weight on the skis!
To put this very simply,
- [putting body weight on the skis]・・・loading the skis while flexing the legs
- [Weighted]...building ski pressure while resisting with the legs
That's what I mean,
This doesn't explain it (lol)
putting body weight on the skis means bending your legs and putting weight on them.
Basically, when you put your weight, you turn the legs around and weigh.
In contrast, weight gain is to put more strength than your own weight.
Exactly, by putting your feet on the skier to external forces acting on the skier you can thus put more pressure than weigh yourself on the snow surface! ↑ This is very important! )
To apply weight, stretch your legs and apply pressure.
By the way, external forces acting on the skier in skiing refers to gravity and centrifugal force.
By making good use of this external forces acting on the skier
Remember that ski/skis generates pressure to run.
Add weight to ski / skis and bend the board!
“Weight = stretching the legs and applying pressure” We talked about this.
To make the board,
You need to push more strong pressure by using external forces acting on the skier.
And in order to use external forces acting on the skier,
[Weight] We must continue to do so.
In other words, to bend the board,
More “weighting” is required than “putting body weight on the skis”!
Preparation in the first half of the turn is also important, but
Here, let’s look at the turn MAX, which is the most strong pressure situation!
Here to put the board. 1 I will tell you about the turn!
That is...
“Extend your legs, and continue to press you until the end.”
He's actually a top player
No one is going to go up with his legs until the end of the turn.
The legs are deeply bent,
Are you not in the middle of the center of mass and are you at a low turn-end – transition situation?
in the second half of the turn The legs actually bend, but This is not bending yourself!
Let me explain this in a little more detail.
At the end of the turn, don’t turn your feet on to create a low position in the center of mass but continue to weigh while you try to stretch your feet!
So the plate will be shining, and the legs will not turn without "natural" turning!
The above contents are
I have covered all the important points this time ^^;
Memorize every word by the season,
Let us complete the picture that will make you stand out! and laughing

From here we will enter the second half of the turn,
Your feet are extended here.
From the next situation
Instead of bending your legs,
Add weight with the intention of continuing to stretch.
In fact, the end of the turn is stronger as pressure from the snow side, so even if you continue to weigh with the consciousness of extending, your feet can’t tolerate that pressure while they are extended.

In this way, instead of "bending" your legs on your own,
Building ski pressure while resisting with the legs continues to become stronger by external forces acting on the skier.
Natural legs "It's turning" This is the image.
NaokiThe low silhouette of the center of mass, which was firmly twisting the foot of a good man, was actually not "wrapping" but "wrapping".
However!
If you don’t get to the “Center Position” on a ski step, ski will not be hard!
It becomes very clear when you actually try it,
If you are too close to the top or the tile position,
If your legs are turning, the position is not good and then balance will break down.
Needless to say,
The board doesn’t have to run ski, right?
Regarding the center position
I remember this well by the guidance of former National Demonstrator, One Mountain Show.
“The foot is standing in a lightly touched position to the shoe, according to the front angle of the shoe.”
Please refer to the image! ^^
[Summary] putting body weight on the skis and weight of skiing
Now, here's the summary for this time!
- Skiing is a test or competition, and the turn-speed winner will win.
- The skis carrying speed smoothly through and out of the turn means that by pressing on the board, the plate is shaken and the resistance force that the shake attempts to return to its origin accelerates.
- [putting body weight on the skis]...Put your weight on skiing
- [Weight]...Add more weight than your body weight
- putting body weight on the skis bends itself to putting body weight on the skis
- Weighting extends your feet and uses external forces acting on the skier to put more strength than your weight on the snow.
- The end of the turn, not to “switch” your feet from yourself but building ski pressure while resisting with the legs continues to become stronger and more by following external forces acting on the skier, nature and foot “switch.”
So,
What did you think?
And now the contents of this article,
We have created significantly enhanced content!
This is a paid article, but
I couldn't write it all here,
"Release of pressure after deflection" Regarding,
It's explained in great detail ^^

- First of all, what is “the skis carrying speed smoothly through and out of the turn”?
- Understand the difference between “putting body weight on the skis” and “weighting”!
- Let's create a position where skiing can step on!
- Add weight and bend the board!
- Once the board is bent, release the pressure!
- Summary
Well, that's it for this time!
I read it until the end,
Thank you very much!






感想や質問があればお気軽にどうぞ!
0件のコメント