Level up to SAJ Technical
NaokiHello everyone!
I’m Naoki, a Japanese skier who gives skiing his all for life. I specialize in Japan’s SAJ ski tests and have helped many skiers pass.
Tried SAJ Technical three times
1After failing for the first time
As a result of research aimed at SAJ Technical...
He has been up until he is out of the level. 4 I have been able to compile the elements!
At first, it started with a failure of -5 points,
We will introduce you to the process of leveling up until you pass the exam with additional points!
4 one level up for SAJ Technical
I started to get through SAJ Technical. 4 I will first bring you up the level!
- Low transition
- Entering a turn that does not extend upwards
- movement of the center of mass following skiing
- Weight in the second half of the turn
Let's take a look at them one by one!
①Low transition

The first one is transition.
Looking at the slippage in the test that I failed,
I was switching while standing up, so center of mass remained high and transition remained high.
Don't let the pressure go away,
I tried to improve the sliding so that it was transitioning in a low position.

This is the study of all Japanese players' sliding, because many players were down center of mass in transition.
The idea was to try to imitate that.
It is not good to keep down the center of mass.
In my case, the transition center of mass was reduced by a step and it became possible for transition without extending pressure.

The next point is also following this!
② Entering a turn that does not extend upwards

When entering the next turn,
Entering the turn without lifting up.
After lower transition...
You will be able to get into the turn without pressure and quickly catch the snowfront around the valley!

By the way, this eliminates vertical movement
I'm not saying that,
Be careful not to make a mistake!
The vertical movement used when entering a turn is
With the move to the valley, this movement is OK!

Rather, it is effective for increasing turn speed.
But!
I am talking about it, that you will grow up here.
When this happens, it becomes more difficult to get under pressure.
2The second thing was to improve this.
Now let's move on to 3!
③movement of the center of mass following skiing

Next is movement of the center of mass following skiing.
My personal feeling is,
Regarding movement of the center of mass until it fails...
Anyway, my body falls towards the valley side
That's all I was thinking about.

So I was moving side toward ski, but I didn't think about the long movement at all!

The beginning of this “fore-aft movement” was one of the little ones that sliding up.
Thanks to being aware of fore–aft movement,
The movement of the center of mass will be able to follow the ski.
Thanks to this, the position is better,
Especially in the long-term turnover.
So...
In the first half of the turn, move firmly forward.
In the second half, back / behind from the heel

Go forward and move back in line with the position!
This movement of the center of mass was the second point of 3!
④ Weight in the second half of the turn

The last point is "Weight" That's it!
Weighting literally means "Adding more weight than your body weight to the snow surface" That's it!
I learned this weighting was a pretty big point to change my own sliding!
It is in the second half of the turn that weight becomes necessary,
I was just on ski at the beginning, and I played “Putting body weight on the skis” which is usually weighing.
There, by strictly stretching your feet to the limit and turning into a move that continues to push pressure, we have made it possible to use stronger pressure!

As a result, The long- 2 It was a point reduction, but we could evolve to the slide until it came up in time.
I changed my skiing since I was not qualified for SAJ Technical. 4 It was a point!
Let's review it one last time!
- Low transition
- Entering a turn that does not extend upwards
- movement of the center of mass following skiing
- Weight in the second half of the turn
So,
What follows is for those who are aiming to pass the SAJ Technical from now on.
Let us take this step and complete the SAJ Technical elements needed!
Passing elements required for SAJ Technical

Now, what are the necessary elements to pass SAJ Technical?
The conclusion is this!
- Turn speed
- Adapting to Conditions
This is 2 I have explained it in another article...

Mainly introduced this time,
I did it to raise the level. 4 The point is actually all... It was the same purpose
Here it is!
increasing turn speed
Not to get out of pressure, movement of the center of mass and weighting were all a goal to raise turn speed.
In other words, what is SAJ Technical...
We need a turn that has increased speed and scouts performance more than ever!
By the way, even if you change from SAJ Technical to SAJ Crown,
The elements required to pass the turn speed and condition adaptation are not changed!
Simply put, the difference is
It's all about precision!
I have told you a lot of points this time, but the goal is very simple to get the turn speed out.
Let me keep it in mind!
[Summary] Level up to SAJ Technical
Now, here's the summary for this time!
SAJ Technical Non-Compliance: 4 points to the highest level of qualification.
- Low transition
- Entering a turn that does not extend upwards
- movement of the center of mass following skiing
- Weight in the second half of the turn
The elements necessary to pass SAJ Technical are 2
- Turn speed
- Adapting to Conditions
By saying that,
How did you feel this time?
What specifically did you change in terms of technology this time?
I've talked about this from my experience!
Of course, not everyone is going to get the level up and pass on SAJ Technical...
I am glad you can get your own level up!
That's all for this time!
Please watch until the end,
Thank you very much!





感想や質問があればお気軽にどうぞ!
0件のコメント