[Video Advice] Basics of outside foot / outside leg putting body weight on the skis needed for stable carving turns

carvingskiing Basics
Naoki, a Japanese skierNaoki

Hello everyone!
I’m Naoki, a Japanese skier who gives skiing his all for life. I specialize in Japan’s SAJ ski tests and have helped many skiers pass.

Well, this time,
Advice on skiing for our customers!

So right away,
Let's see how our customers skate!

In the comments I received,

As you’re getting self-flowed, please give basic advice on the carving turn.

That's what he said.

In the ski improvement, you can’t avoid this carving turn.

outside foot / outside leg putting body weight on the skis That's right.

Especially in carving turn,
The quality of this putting body weight on the skis directly affects the stability of sliding.

So this time
We will explain how to put the center of mass on your foot through the outside of the turn and weigh weight.

Why do you need to ride "outside foot / outside leg"?

Carving turn is a technology that turns using the sidecut of ski/skis.

Dig the board into the snow surface,
Strong pressure must be applied to bend it.

Diagram comparing ski sidecut with a flexed ski during a turn

To counter the centrifugal force generated during the turn,
The most efficient way to transmit power to the snow surface is "Foot outside the turn" That's how it works.

“Improvement tips” seen from the video

Analyzing video slippage,
From the middle to the end of the turn, you can see many scenes where center of mass remains too much inside the turn (depending on inside foot/interior leg).

Skier demonstrating a turn on a snowy slope

This is the case with carving performance.

The board is not “took” but “flowing”.

To increase the stability,
“Putting body weight on the skis” rather than “putting body weight on the skis.” Awareness is essential.

Please also refer to this for leaning too far inside and losing outside-ski support.

Related reading
leaning too far inside and losing outside-ski support checkpoint 3 selection of skiing
[Dramatic Change!] Three Checkpoints to Improve Ski leaning too far inside and losing outside-ski support! Beware of leaning too far inside and losing outside-ski support!! Even advanced players have pitfalls!? This time, we're talking about 'leaning too far inside and losing outside-ski support'! ▼ For those who want to listen to it by audio, click here! (Background playback is also possible!) ) leaning too far inside and losing outside-ski support is intense...

3 steps to dramatically change your skiing with the correct outside foot / outside legputting body weight on the skis

We will present you with a specific approach to getting stable carving.

① Create a “dog” posture (angulation)

Ski ski pole work

Instead of just turning your body inward,
Leave upper body on the outside using your waist as a fulcrum "kunoji" Be aware of your posture.

If you have a picture that reduces the side back somewhat, your weight will be reduced to outside foot/outdoor leg. This allows you to cling the center of mass on the outside foot/outdoor leg while setting the ski edge.

②Getting in at the “early stage” when starting a turn

Skier demonstrating a turn on a snowy slope

Many skiing players are in the middle of the turn.
That means you’re trying to step down after skiing, but it’s too late.

Immediately after the previous turn and transition,
Keep the next turn on your outside foot/outdoor leg.

When you are ready to ride outside foot/outdoor leg from the fall line (the valley side) before turn, the whole turning is dramatically stable.

③Drill to lightly float “inside foot / inside leg”

This is what I recommend
This is the most effective practice method to experience outside foot / outside legputting body weight on the skis.

  • Practice method: Put the top of the ski inside during the turn and try to slide with only a thel floating.
  • Effect: How can you get a balance during the turn by making a situation that is not required to ride 100% outside foot/outdoor leg? Where do you get out of foot or outside? I know that training is going.

[Summary] The basis of carving turn is 100% outside foot / outside legputting body weight on the skis

In the carving turn, putting body weight on the skis is a basic way to carry out weight to outside foot/outdoor leg.

“Outside foot/outside leg 10: inside foot/interior leg 0” is a short way to improve and gradually find the balance that fits you.

Next when you go to the gerend, make sure that "always feel the snow-sweating back of outside foot / outside leg." That is the only way that the quality of the slide will be surprisingly changing!

carvingskiing Basics

If you enjoyed this article,
follow me!

Share this article!

感想や質問があればお気軽にどうぞ!

0件のコメント

Contents